Midea Dishwasher Error Codes

Complete Troubleshooting & Diagnostic Guide

Water Supply Errors
E1
Water Inlet Problem
  • Ensure water supply valve is fully open.
  • Check inlet hose for kinks or blockage.
  • Clean inlet filter screen.
  • Test inlet valve operation.
Drain System Errors
E2
Drain Issue
  • Inspect drain hose for blockage or bends.
  • Clean filter and sump area.
  • Check drain pump operation.
  • Replace pump if faulty.
Heating System Errors
E3
Heating System Fault
  • Test heating element continuity.
  • Inspect thermal fuse and wiring.
  • Check control relay function.
  • Replace heater if defective.
Safety System Errors
E4
Water Overflow Detected
  • Check float switch operation.
  • Inspect for water leaks inside base.
  • Ensure inlet valve is closing properly.
  • Dry unit and reset after repair.
Motor System Errors
E5
Spray Motor Failure
  • Check circulation pump wiring.
  • Inspect impeller for blockage.
  • Test motor resistance.
  • Replace spray motor if needed.
Sensor Errors
E6
Sensor Error
  • Inspect wiring harness connections.
  • Check pressure and temperature sensors.
  • Clean sensor contacts if dirty.
  • Replace faulty sensor module.
Important: If error codes persist after troubleshooting, disconnect power and contact a certified appliance technician.